ISI certification

Introduction to Certification

Thailand implements the TISI certification system combining compulsory certification and voluntary certification. For products that meet the standards, TISI marks are allowed to be used. For products that have not formulated standards, TISI also implements product registration as a temporary certification means.

The Thai government requires mandatory certification of 60 categories of products, involving 8 fields, including: electrical equipment and accessories, medical equipment, building materials, consumer goods, vehicles, PVC pipes, LPG gas containers and agricultural products. In addition, the certification of other types of products belongs to voluntary certification. Voluntary certification can only be applied for by local manufacturers.

The Industrial Product Standards Act authorizes the Thai Industrial Standards Institute (TISI) to be responsible for certification in Thailand. TISI is not only the government authority for compulsory certification in Thailand, but also the standard formulation and management agency, certification agency, laboratory accreditation, personnel training and registration agency. It is worth noting that there is no non-governmental mandatory certification body in Thailand.

Product scope

For electronic and electrical products, TISI certification covers a total of 42 categories, and only the following are listed:

TIS 4 Part 1-2529 (1986) Filament lamp May 1, 1987

TIS 23-2521 (1978) Ballast fluorescent lamp April 1, 1979

TIS 344-2549 (2006) Tubular fluorescent lamp and starter support July 13, 2008

TIS 366-2547 (2004) Iron: Safety Requirements December 26, 2005

TIS 934-2533 (1990) A.C. Fans: Safety Requirements December 25, 1991

TIS 956-2533 (1990) Fluorescent Lamps: Safety Requirements September 25, 1991

TIS 1039-2547 (2004) Electric cooker: safety requirements February 21, 2006

TIS 1389-2539 (1996) Drum dryer: safety requirements March 23, 2002

TIS 1462-2548 (2005) Household washing machine August 21, 2007

TIS 1509-2547 (2004) Electric fryer: safety requirements April 27, 2006

TIS 1693-2547 (2004) Instant Water Heater: Safety Requirements April 23, 2006

TIS 1773-2548 (2005) Microwave oven safety requirements: August 21, 2007

TIS 1955-2542 (1999) Lighting and similar equipment: Radio interference limitation August 11, 2002

TIS 1985-2549 (2006) Skin or hair care equipment: safety requirements July 14, 2008

TIS 2134-2545 (2002) Environmental Requirements for Air Conditioning Energy Conservation March 11, 2005

TIS 2186-2547 (2004) Household refrigerator: environmental requirements: energy conservation December 23, 2006

Note: Please refer to the list of mandatory products for details.

Application process

1. The customer prepares samples and submits them to Sincere Testing

2. Zhixin Testing submits the samples and data to the Thai cooperative laboratory for testing

3. The test shall be conducted in the experiment and the factory inspection shall be conducted at the same time

4. After passing the test and factory inspection, TISI will issue a certificate

Certification mark

Other information

Technical information: voltage frequency AC 220V/50Hz, plug TIS 166-2549

Mandatory: mandatory+voluntary

Validity of certificate: 3 years

Factory inspection requirements: first factory inspection and annual review are required

Requirements for the certificate holder: it needs to be a local registered company or a local agent

Energy Label Energy Efficiency Certification

Introduction to Certification

The regulatory agencies of Thailand's energy efficiency include: Electricity Generating Authority of Thailand (EGAT) and Department of Alternative Energy Development and Efficiency (DEDE).

Product scope

It covers 16 categories of products, including air conditioners, washing machines, refrigerators, ballasts, fans, rice cookers, lamps, electric kettles, etc.

Application process

1. The customer prepares samples and materials and applies to submit them to Zhixin for testing.

2. Sincerely inspect and submit the samples to the laboratory for testing, and then submit them to the issuing authority for certification.

3. The issuing institution shall audit the report and issue the energy efficiency certificate.

Marking requirements

Other information

Technical information: voltage frequency AC 220V/50Hz, plug TIS 166-2549

Mandatory: mandatory+voluntary

Validity of certificate: 3 years

Factory inspection requirements: no requirements

Requirements for the certificate holder: it needs to be a local registered company or a local agent

NTC Wireless Authentication

Introduction to Certification

The National Telecommunication Commission of Thailand (NTC) is the authority that regulates radio and telecommunications regulations in Thailand. All radio and telecommunications products must obtain NTC permission before entering the market. Local registered NTC licensees are required and suppliers code is required. There are three certification modes according to the product category:

1. Class A Approval: The product must be tested in the laboratory designated by NTC and provided with the data required by NTC to obtain the login number and certification certificate.

2. Class B Approval: The certification procedure is the same as that for Class A products, except that foreign reports such as FCC and R&TTE can be used to apply for the certification of the transfer mode, and the registration number and certification certificate must also be obtained.

3. SDoC Declaration of Conformity: This part of product certification is voluntary, and the customer's local representative in Thailand must fill in the SDoC form and send it to NTC together with the technical documents for future reference.

Product scope

All wireless and telecom products

Application process

1. The customer prepares samples and materials and applies to submit them to Zhixin Testing

2. Sincere Testing will conduct the test and issue the test report after the test is completed

3. NTC reviews the documents and issues the certificate if there is no problem

4. NTC mark affixed by the importer

Label requirements

Other information

Technical information: voltage frequency AC 220V/50Hz, plug TIS 166-2549

Mandatory: mandatory

Certificate validity: no validity

Factory inspection requirements: no requirements

Requirements for the certificate holder: it needs to be a local registered company or a local agent